Siemens SIMATIC PCS 7 SMART User Manual

4.2 PCS 7 SMART inclusions
PCS 7 SMART applications
You create a smart project on an Engineering Station (ES), which provides various
applications. All applications have simplified user interface to ease your operations and display
your configuration data. When you work through Getting Started project, you will use the
following applications:
● SIMATIC Manager - the central application and gateway to all other applications that you
use to create a PCS 7 SMART project. SIMATIC Manager is the starting point for creating
your entire project.
● HW Config - used to configure entire hardware of a system, for example, CPUs, power
supply, and communications processors.
● Continuous Function Chart (CFC) and Sequential Function Chart (SFC) Editors - used to
create CFCs and SFCs.
● Operator Station (OS) - used to configure the OS.
PCS 7 SMART overview
4.2 PCS 7 SMART inclusions
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
22 Getting Started, 12/2017, A5E42181435-AA

Siemens SIMATIC PCS 7 SMART Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 SMART
Category	Control Systems
Language	English