Siemens SIMATIC PCS 7 SMART - Operator control and monitoring in process mode

10.2 Operator control and monitoring in process mode
10.2.1 WinCC language settings
Introduction
If the language selected in WinCC is not used, the corresponding text content will not appear
in PCS 7 SMART. Question marks are displayed instead.
Prerequisites
● WinCC Explorer is open.
Procedure
1. Navigate to "OS (1) > Computer" and double-click the computer name to open the
"Computer properties" dialog.
2. Select the "Parameters" tab.
3. Select the "English" language in both boxes.
4. Click "OK".
5. Close the window.
10.2.2 Activating process mode
Prerequisites
● WinCC Explorer is open.
● The color_gs project is open.
Working in runtime
10.2 Operator control and monitoring in process mode
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 173