Siemens SIMATIC PCS 7 SMART User Manual

Procedure for Activating Process Mode
1. Select File > Activate.
The progress bar and start screen open.
2. Click "RMT1" in the overview area.
This displays the process picture which you created in the Graphics Designer.
10.2.3 Starting the process
Introduction
To enable operator control and monitoring of all functions you have configured, start the dosing
process.
Dosing is started using the SFC. You start the SFC directly in process mode without having
to change back to SIMATIC Manager.
There are two ways to start the process:
● Using the block icon "..../RMT1/SFC_RMT1".
● Using a button in the button set.
Using the block icon
1. Click the block icon "..../RMT1/SFC_RMT1".
The corresponding faceplate opens.
2. Click "Start".
The "SFC Operation" dialog box opens.
3. Click "OK".
The sequential control system starts and you can follow the process in your process picture.
4. Double-click a step in the SFC to view additional details about the current status of the SFC.
Working in runtime
10.2 Operator control and monitoring in process mode
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
174 Getting Started, 12/2017, A5E42181435-AA

Siemens SIMATIC PCS 7 SMART Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 SMART
Category	Control Systems
Language	English