Using the button set
1. Click "Change Button Set":
The second button set is displayed.
2. Click "SFC Visualization".
The "Open SFC" dialog box opens. Since you only have one OS and one SFC in your
project, only this OS is displayed in the tree view and only the SFC in the detail window.
3. Select the "RMT1/SFC_RMT1"chart in the detail view and click "OK".
Working in runtime
10.2 Operator control and monitoring in process mode
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 175
To Next Page
Loading...
