7. Select the "Access points" folder in the tree view.
8. Double-click the "S7ONLINE" access point in the detail view. The detail view for "Access
point" is displayed.
9. In the "Associated interface parameter assignment" drop-down list, select "PC internal.local.
1". Click "Apply" to save your settings.
10.Specify "PG mode" as the "Mode of the module" for all other network adapters.
11.Close the configuration console.
Initial work for the project
5.2 Preparational settings for the network
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA 33
To Next Page
Loading...
