Siemens simovert masterdrives - Page 1384

Parameter
Description Data Read/write
U719*
SrcAxialWinderB
2719
[FD784b] Input binectors for axial winders
Index 1: Diameter calculator
Hold diameter, the last calculated diameter value is frozen
Index 2: Diameter calculator
Set diameter, adopts the setting value present at U717.6
Setting has higher priority than holding.
Index 3: Diameter calculator
Changing over the type of winding from top to bottom
Index 4: Moment of inertia
Changing over the type of winding from top to bottom
index1: 0
Unit: -
Indices: 4
Type: L2 ,B
Menus:
- Parameter menu
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U720
AutomaticRecord
2720
The automatic record stored in the EEPROM is displayed
on parameters.
The automatic record consists of the following data:
1. Program number / continuation number / record number
2. Validity bits of functions or values
3. 1...4 G-function
4. Position
5. Speed
6. 1...3 M-function / D-number
index1: 0
Min: -
2147483647
Max:
2147483647
Unit: -
Indices: 6
Type: I4
Menus:
- Parameter menu
+ Technology
+ Positioning
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U721
AutomaticRecord
2721
The automatic record stored in the EEPROM is displayed
on parameters.
The automatic record consists of the following data:
1. Program number / continuation number / record number
2. Validity bits of functions or values
3. 1...4 G-function
4. Position
5. Speed
6. 1...3 M-function / D-number
index1: 0
Min: -
2147483647
Max:
2147483647
Unit: -
Indices: 6
Type: I4
Menus:
- Parameter menu
+ Technology
+ Positioning
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U722
AutomaticRecord
2722
The automatic record stored in the EEPROM is displayed
on parameters.
The automatic record consists of the following data:
1. Program number / continuation number / record number
2. Validity bits of functions or values
3. 1...4 G-function
4. Position
5. Speed
6. 1...3 M-function / D-number
index1: 0
Min: -
2147483647
Max:
2147483647
Unit: -
Indices: 6
Type: I4
Menus:
- Parameter menu
+ Technology
+ Positioning
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U723
AutomaticRecord
2723
The automatic record stored in the EEPROM is displayed
on parameters.
The automatic record consists of the following data:
1. Program number / continuation number / record number
2. Validity bits of functions or values
3. 1...4 G-function
4. Position
5. Speed
6. 1...3 M-function / D-number
index1: 0
Min: -
2147483647
Max:
2147483647
Unit: -
Indices: 6
Type: I4
Menus:
- Parameter menu
+ Technology
+ Positioning
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U724
AutomaticRecord
2724
The automatic record stored in the EEPROM is displayed
on parameters.
The automatic record consists of the following data:
1. Program number / continuation number / record number
2. Validity bits of functions or values
3. 1...4 G-function
4. Position
5. Speed
6. 1...3 M-function / D-number
index1: 0
Min: -
2147483647
Max:
2147483647
Unit: -
Indices: 6
Type: I4
Menus:
- Parameter menu
+ Technology
+ Positioning
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
224
Siemens AG 6SE7087-6QX70 (Edition AL)
SIMOVERT MASTERDRIVES Compendium Motion Control