Siemens simovert masterdrives Compendium

09.2008 Communication / PROFIBUS
Siemens AG 6SE7087-6QX70 (Version AK)
SIMOVERT MASTERDRIVES Compendium Motion Control 8.2-75
8.2.8.1 Operating the CBP with a SIMATIC S5
When the CBP is used with a SIMATIC S5, it is operated as a standard
DP slave.
As possible master boards, the IM308 B or the IM308 C can be used, or
even the CP5431 in limited form.
The planning tools COM ET200 or COM PROFIBUS are available for
configuring the master station.
If older versions of these planning tools are used, you must copy the
master file or type-description file from the accompanying CD into the
appropriate sub-directory of the planning software.
When configuring the CBP, please use the SI8045TD.200 type-
description file on the CD.
Please copy the type-description file into the directory containing the
COM ET 200 files in the PG/PC.
CD C:\COMET200
COPY A:\SI8045TD.200 C:
The type of PPO is selected in the configuration mask of COM ET200 up
to Version V4.x by entering identification bytes in accordance with the
above table of identification bytes.
COM ET200 up to
Version V4.x
Example

Siemens simovert masterdrives Specifications

General

Brand	Siemens
Model	simovert masterdrives
Category	DC Drives
Language	English