Siemens simovert masterdrives Compendium

Communication / CBC 03.2010
6SE7087-6QX70 (Version AL) Siemens AG
8.4-32 Compendium Motion Control SIMOVERT MASTERDRIVES
8.4.5.1 Basic parameterization of the units
Optional boards?
P060 = 4
P711 = 0...2000
no
yes
Possible optional boards: CBC, CBP, TB
Basis identifier for PKW task / PKW reply
P722 = 0...65535
P053 = x
Function selection "hardware configuration"
P712 = 0...2000
Basis identifier for PZD-receive
P713 = 0...2000
P714 = 1...16
Number of PZDs for PZD-send
P715 = 0...65535
Update rate for PZD-send
P716 = 0...2000
Basis identifier for PZD-receive broadcast
P717 = 0...2000
Basis identifier for PZD-receive mulitcast
P718 = 0...2000
Basis identifier for PZD-receive cross transfer
P719 = 0...2000
Basis identifier for PZD-request broadcast
P720 = 0...8
Baud rate
P721.01 = 0
CAN-profile (at the present only 0 possible) (optional)
P721.02 =
0...65535
Bus timing (optional)
P918 = n
CBC bus address (0
≤ n < 128)
P060 = 0
Leave "hardware configuration"
P060 = 5
For setting the telegram failure time in ms
(0 = deactivated)
Parameterization enable CBC
Function selection "drive setting"
Basis identifier for PZD-send
Fig. 8.4-16 Parameterization of the "hardware configuration" for MASTERDRIVES
with CUPM, CUMC or CUVC
Basic
parameterization for
MASTERDRIVES
with CUPM, CUMC
or CUVC

Siemens simovert masterdrives Specifications

General

Brand	Siemens
Model	simovert masterdrives
Category	DC Drives
Language	English