Communication / SIMOLINK 12.2010
6SE7087-6QX70 (Version AM) Siemens AG
8.3-20 Compendium Motion Control SIMOVERT MASTERDRIVES
8.3.10 Special data and application flags
For special functions, further options for data transmission are available
via the SIMOLINK bus.
With application flags it is possible to transmit an additional four binary
items of information. These are not explicitly assigned to any station,
i.e. every station can read and set the application flags. Resetting is
only possible via the dispatcher/master.
Parameterization:
P747 Src.SLB Appl.Flags:
Used to specify the binectors to be used as application flags.
B7010 to B7013:
These binectors indicate the applications flags received.
In addition to the 8 telegrams per station, a total of four special
telegrams with 32 bits of useful data are available for data transmission
in the SIMOLINK bus. The special telegrams can be read by any station
but only written by the dispatcher (currently only MASTERDRIVES MC) /
master.
Parameterization:
P756 Src.SLB special data: (dispatcher only)
Used to specify the double connectors to be transmitted as special
data.
KK7131 to KK7137:
These connectors indicate the special data received.
Application flags
Special data
To Next Page
Loading...
