09.2008 Communication / PROFIBUS
Siemens AG 6SE7087-6QX70 (Version AK)
SIMOVERT MASTERDRIVES Compendium Motion Control 8.2-27
MASTERDRIVES MC with parameter model to PROFIdrive profile
version 2. In combination with the CBP2, DPV1 can be utilized in
accordance with PROFIdrive profile version 3.
Drive
(V2)
[1..n]
+1
PKW client (V2)
[1..n]
DPV1 client (V3) [0..n-1]
♦ Access operations to simple parameters (i.e. parameters without
indices) must be identified by "No. of elements" = 0.
♦ Changing the sub-areas of an array is not supported by the CBP2, i.e.
it is possible to transfer a write task either for one index or for all
indices. To alter a complete parameter array, the number of values
has to be equal to or greater than the size of the array.
♦ The editing of texts or descriptions is not supported.
♦ Reading of several or all texts from a text array via a parameter task
is not supported, i.e. only one text from one text array (subindex) can
be read with one parameter task.
Special features /
restrictions
To Next Page
Loading...
