Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
118 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
3. Drag the unspecified motor to the lower area of the Motor Module.
Figure 4-33 Motor inserted
4. Click the unspecified motor in the device view.
5. Open the Inspector window if it has still not been opened or displayed.
6. Select the "Motor details" item in the secondary navigation of the Inspector window.
The "Motor details" input screen form is divided into the sections:
– Rating plate values
– Motor brake (see Chapter"Adding a standard motor (Page 114)")
– Optional motor data (can also be activated)
– Equivalent circuit diagram data (can also be activated)
To Next Page
Loading...
