Siemens SINAMICS S120 - Structure of the User Interface; Project View for Parameterizing the Drive

Startdrive commissioning tool
2.2 Structure of the user interface
Commissioning with Startdrive
32 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
2.2
Structure of the user interface
2.2.1
Project view for parameterizing the drive
The following figure shows an example of the components of the project view:
①
Project tree Used to display and edit components and project data.
②
Details view Shows the details of an element selected in the project tree.
③
Working area: Used to configure and parameterize a drive.
④
Inspector window: Shows properties and parameters of an object selected in the working area.
Figure 2-1 Overview of Startdrive user interface