Siemens SINAMICS S120 - Alternatively: Creating a Project with a Device Configuration Derived from the Hardware; Creating a New Project

Commissioning
4.6 Alternatively: Creating a project with a device configuration derived from the hardware
Commissioning with Startdrive
152 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
4.6
Alternatively: Creating a project with a device configuration derived
from the hardware
4.6.1
Creating a new project
For projects, the choice is yours:
● You create a completely new project (see "Create new project").
● You open an existing project, and subsequently change the project configuration (see
"Open existing project").
Requirement
You have opened the Startdrive in the TIA Portal (Page 77)application.
Creating a new project
You can create new projects once the Startdrive application has been opened in the TIA
Portal.
1. Click "Create new project" in the secondary navigation in the portal view of Startdrive.
The entry fields for the basic project data are displayed to the right in the detailed view.
Figure 4-58 Entering project data