Diagnostics
5.3 Diagnostics via Startdrive
Commissioning with Startdrive
348 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Exporting and importing measurements
Requirement
At least one measurement is in the "Measurements" system folder for export.
To export a measurement, proceed as follows:
1. Display the measurement in the working area (see Chapter "Creating or calling a trace
(Page 339)").
2. Click on icon
to export the selected measurement.
The "Save as..." dialog box opens.
3. Select a folder, file name and possibly a file type to save the measurement.
4. Click the "Save" button.
To import a measurement, proceed as follows:
1. Select the
"Measurements" system folder and select "Import measurement" from the
shortcut menu.
The "Open" dialog box is opened.
2. Select the file of the "*.ttrecx" file type with the measurement to be imported.
3. Click the "Open" button.
Transferring the trace configuration from the drive to the project
Requirement
● An online connection has been established to the drive.
● A trace is saved in the drive.
Proceed as follows to transfer a trace configuration to the project:
1. Open a trace in the drive (see Chapter "Creating or calling a trace (Page 339)").
2. If required, activate the icon
for monitoring.
3. Click on icon
to transfer the trace configuration from the drive into the project.
To Next Page
Loading...
