Siemens SINAMICS S120 - Project Navigation

Startdrive commissioning tool
2.2 Structure of the user interface
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
33
2.2.2
Project navigation
Description
The project tree is used to display and edit components and project data.
After they have been inserted, drives are hierarchically displayed as follows in the project
tree:
Figure 2-2 Example: Project tree
The most important information of a project:
● Project name
● Name of the new added drive
● Device configuration of the new added drive
● The created drive objects of a drive (automatic speed control, infeed, drive axis...)
● Trace recording of drive