Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
117
Inserting and specifying motors that are missing from the motor list
The mandatory fields for entering motor data manually are pink.
Inserting and specifying a motor via motor data entry
You can insert motors in unspecified form using the hardware catalog.
1. Open the "Motors" item in the hardware catalog and then the subitem "Motor data input".
The motors are presorted according to motor type. A range of induction motors,
synchronous motors and reluctance motors are available for a general selection.
2. Select the unspecified motor in the device overview.
Figure 4-32 Motor selected
To Next Page
Loading...
