Siemens SINAMICS S120 - Accepting the Settings in the Drive

Commissioning
4.10 Safety Integrated commissioning
Commissioning with Startdrive
226 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
4.10.2.3
Accepting the settings in the drive
After you have parameterized all safety functions, the drive must accept the settings.
Note
To accept the settings in the drive, it must be online.
1. To accept the settings and deactivate the safety functions, click the icon in the toolbar.
The following steps are executed:
– The parameter settings are copied from CPU 1 to CPU 2.
– Copy RAM to ROM is offered.
– Safety mode is deactivated, the icon now has a yellow border.
2. Go offline with the drive.
You can now continue with the further settings of the parameterization. The dialogs are
no longer deactivated.