Appendix
A.4 Shortcut menus and icons in Startdrive
Commissioning with Startdrive
388 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Align the chart legend to the right
Display of the legend and the bit track labels on the right side of the curve diagram.
Change background color
Changeover between various background colors.
The "Measurements" tab displays the individual measurements and among other things
provides the setting options for synchronization.
The following table shows the shortcut menu commands for the table in the "Measurements"
tab:
"Copy" Copies the contents of the selected lines to the clipboard.
Switches the selected cell to the editing mode.
"Import measurement" Imports a measurement from a file, e.g. with the "*.ttrecx" file
extension.
The import is device-independent and also suitable, for example,
for comparing measurements of a PLC with the measurements
of a drive device.
For reasons of compatibility, the "*.ttrec" file extension is sup-
ported in V12, although it does not contain any information about
the device family.
"Export measurement" Exports a measurement as a file with the extension "*.ttrecx" or
"*.csv".
For reasons of compatibility, the "*.ttrec" file extension is sup-
ported in V12, although it does not contain any information about
the device family.
To Next Page
Loading...
