Siemens SINAMICS S120 - Specifying the Encoder Evaluation

Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
126 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
4.4.7.2
Specifying the encoder evaluation
Requirement
You have already specified an encoder. The non-specific encoder evaluation is displayed.
Specifying the encoder evaluation
Various Sensor Modules are available for the encoder evaluation. Different types are offered
for selection depending on the encoder.
1. Click on the non-specific encoder evaluation.
Figure 4-38 Selecting an encoder evaluation