Siemens SINAMICS S120 - Important Parameters

Commissioning
4.7 Basic parameterization of the drive objects
Commissioning with Startdrive
184 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
4.7.3.4
Important parameters
Description
You define the basic properties of the drive control using the important parameters.
Figure 4-77 Important parameters
Parameters
Designation
Description
p1121 Ramp-down time Ramp-down time which the drive requires to decelerate from
maximum speed (p1082) to standstill.
p1135 OFF3 ramp-down
time
The OFF3 ramp-down time sets the ramp-down time from
maximum speed down to standstill for the OFF3 command.