Siemens SINAMICS S120 - Inserting Additional System Components; Adding a CBE20 Communication Board

Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
129
4.4.8
Inserting additional system components
Various system components can be inserted (additionally) in the device configuration of your
drive:
● CBE20 Communication Board
● Terminal Module
● Terminal Board
● VSM10 Voltage Sensing Module
Since the handling of these system components differs when inserting, the insertion
procedure is described separately in the following for each system component.
4.4.8.1
Adding a CBE20 Communication Board
Requirement
● A project has been created.
● A Control Unit is contained in the device configuration.
● No Terminal Board TB30 is contained in the device configuration.
TB30 and CBE20 cannot be created simultaneously in the device configuration.