Siemens SINAMICS S120 - Control Mode

Commissioning
4.7 Basic parameterization of the drive objects
Commissioning with Startdrive
192 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
4.7.4.3
Control mode
Control types
The following control types are available for VECTOR drives:
● U/f control with linear characteristic
● U/f control with linear characteristic and FCC
● U/f control with parabolic characteristic
● U/f control with parameterizable characteristic
● U/f control with linear characteristic and ECO
● U/f control for drive requiring a precise frequency (e.g. textiles)
● U/f control for drive requiring a precise frequency and FCC
● U/f control with parabolic characteristic and ECO
● Operation with braking resistor
● I/f control with fixed current
● V/f control with independent voltage setpoint
● Speed control (without encoder)
● Speed control (with encoder)
● Torque control (without encoder)
● Torque control (with encoder)
Figure 4-81 Control mode