Siemens SINAMICS S120 - Page 167

Commissioning
4.7 Basic parameterization of the drive objects
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
167
Deleting the password for user "SINAMICS"
You can delete the password of user "SINAMICS" as follows:
1. Click the "Delete password" button.
The "Delete password" dialog opens.
Figure 4-67 Deleting the password
2. Enter the password for "SINAMICS".
The entry is checked. If you have entered the correct password, the message "Password
has been deleted" appears.
3. Then save the project to accept the settings.
Note
The user "Administrator" must have a password. If this user is to remain enabled for the web
server after the old password has been deleted, a new password must be assigned.
Changing and existing password
Existing passwords for the users "SINAMICS" and "Administrator" can be changed as long
as the user in question is enabled.
1. Click "Change password".
The "Change Password" dialog box opens.
Figure 4-68 Changing the password
2. In the "Old password" input field, enter the user's existing password.
3. Enter the new password in the "New password" input field. Pay attention to upper and
lower case.