Startdrive commissioning tool
2.3 User interface - parameterization
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
35
The SINAMICS modules are arranged as follows in the hardware catalog:
Available Control Units of type SINAMICS CU320-2
Active, Basic and Smart Line Modules
Power Modules (chassis format)
Single Motor Modules and Double Motor Modules
The motors are sorted according to motor type and article number, and are displayed with a
core article number.
Drive-CLiQ motors, Induction motors, Synchronous motors, Reluctance motors, Motor data
Measuring systems (various encoders)
Supplementary system components (CB, TB, TM, VSM, etc.)
Figure 2-3 SINAMICS hardware components
To Next Page
Loading...
