Startdrive commissioning tool
2.3 User interface - parameterization
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
43
The dialog has the following structure:
Creation information (optional)
The components assigned to the modules or main components
Non-assignable components
Activates the parallel connection view.
In the parallel connection view, only the parallel connection-capable components are displayed.
Drive object type of the motor controls
Columns of results table:
• Type of the drive unit
• Component type
• Identification via LED. Is controlled on the Control Unit via parameters p9210 and p9211.
• DRIVE-CLiQ connection of the component
• Article number of the component
Figure 2-9 Device configuration detection
To Next Page
Loading...
