Preface
Commissioning with Startdrive
8 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
The following directives and standards are relevant for SINAMICS S devices:
●
European Low Voltage Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive
2014/35/EU, insofar as they are covered by the application area of this directive.
●
European Machinery Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive
2006/42/EU, insofar as they are covered by the application area of this directive.
However, the use of the SINAMICS S devices in a typical machine application has been
fully assessed for compliance with the main regulations in this directive concerning health
and safety.
●
SINAMICS S devices comply with the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and electronic devices
(RoHS II).
●
SINAMICS S devices comply with the EMC Directive 2014/30/EU.
●
EMC requirements for South Korea
SINAMICS S devices with the KC marking on the type plate satisfy the EMC
requirements for South Korea.
●
SINAMICS S comply with the requirements of the Russia/Belarus/Kazakhstan customs
union (EAC).
●
SINAMICS S devices provided with one of the test symbols displayed fulfill the
requirements stipulated for the North American market as a component of drive
applications.
You can find the relevant certificates on the Internet pages of the certifier
(http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html).
●
Specification for semiconductor process equipment voltage drop immunity
SINAMICS S devices meet the requirements of standard SEMI F47-0706.
●
Australia and New Zealand (RCM formerly C-Tick)
SINAMICS S devices showing the test symbols fulfill the EMC requirements for Australia
and New Zealand.
●
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
To Next Page
Loading...
