Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
88 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Ensure that the version number indicated on the right in the dialog correlates with the
version number of your memory card on the drive unit. If the version numbers do not
match, it will not be possible to go online later. On creation, the current firmware version
is always suggested. If required, you can change the version number via the "Version"
drop-down list.
4. When required, enter a different device name in the input field at the top left, and then
click "OK".
If the "Open device view" checkbox is activated, the device view is opened automatically
in Startdrive when creating the drive.
The drive unit is inserted.
Inserting a drive unit via the portal view
Insert new drive units either in the portal or the project view.
Proceed as follows to insert devices in the portal view:
1. In the navigation, click "Devices & networks".
2. Click "Add new device" in the secondary navigation.
The data for the new device to be added are displayed in the detailed view to the right.
3. Click "Drives" to display the drives available.
To Next Page
Loading...
