Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
90 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
If the "Open device view" option is activated, then the drive unit is immediately created in
the device view.
Figure 4-7 Inserting a drive unit
Inserting a device in the network view
Alternatively, you can insert a drive unit in the network view.
1. Open the network view in the project view.
2. Drag and drop the device from the hardware catalog to the network view.
To Next Page
Loading...
