Siemens SINAMICS S200 - Motor; Transporting and Lifting

5.2 Motor
5.2.1 Transporting and lif
ting
Note
Comply with the local national r
egulations for the transportation of motors.
Requirement
• Use suitable load suspension devices when transpor
ting and installing the motor.
• Do not lift the motor by the connector.
• Transport the motor carefully.
Procedure
Lifting and transporting the motor using slings
You can lift and transport the motor using lifting slings.
WARNING
Incorrectly dimensioned or incorrectly used lifting slings
If lifting slings are incorrectl
y dimensioned or incorrectly used, the motor can fall and cause
death, severe injury and/or damage to property.
• Only use lifting slings that are suitable for the weight of the motor.
• Attach the lifting slings as shown in the 󹪝gure "Lifting and transporting with lifting slings".
Mounting
5.2Motor
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 99