11.1.4 Function buttons
Description
Button Descrip
tion Functions
M button Switch between the diagnosis mode and the monitoring
mode
OK button Acknowledge faults in the diagnosis mode
DOWN button Navigate to the next item
Press the key combination for four seconds to restart the converter
1)
1)
The converter cannot be restarted with this key combination when it is in the “servo-on” state.
System messages
11.1SDI Status
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
318 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
To Next Page
Loading...
