Siemens SINAMICS S200 - Connection Examples with SIMATIC S7-1200

6.8.2.7 Connection examples with SIMATIC S7-1200
Overview
This section shows the examples of connection between S200 PTI and SIMATIC S7-1200. The
signal assignment shown in the examples is based on default settings. You can assign di󹪜erent
signals to inputs and outputs based on your needs.
Connection example
Fast pulse train input position control mode (Fast PTI)
The following illustration uses high-speed 5 V di󹪜erential pulse train inputs and outputs as an
example.
Connecting
6.8Connecting the inputs and outputs
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 157