Siemens SINAMICS S200 - Mounting Instructions for the Line Filter

3.4.3.3 Mounting instructions for the line 󹪝lter
Description
• Observe the requirements for "EMC-compliant installation (Page88)" when mounting the
line 󹪝lter.
• To achieve a low-impedance connection, mount the line 󹪝lter on the same metallic mounting
plate as the converter. Mount these two components as close as possible.
PP
Figure3-11 Connecting the line 󹪝lter (example)
Descr
iption
3.4Accessories
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 65