1. Screw in the eyebolts.
① Position of the eyebolts
2. Hook the crossbar into the eyebolts.
Figure5-3 Lifting and transporting with a crossbar (example diagram)
3. Set the motor down on a hard, level surface.
WARNING
Danger of severe injury due to unintentional movements of the motor
If
t
he
mo
t
or is not secured after being set down, unintentional movements of the motor can
cause serious injury.
• After the motor has been set down, secure it in position.
• Do not release the lifting devices until the motor has been secured in position.
4. Secure the motor against unintentional movements.
Mounting
5.2Motor
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 101
To Next Page
Loading...
