Siemens SINAMICS S200 - Page 26

WARNING
Spread of 󹪝re from built-in devices
Built-in
devices can cause a 󹪝re and a pressure wave in the event of a fault. Fire and smoke can
escape from the control cabinet and cause serious personal injury and property damage.
• Install built-in appliances in a robust metal control cabinet that is suitable for protecting
people from 󹪝re and smoke.
• Only operate built-in devices with the control cabinet doors closed.
• Ensure that smoke can only escape via controlled and monitored paths.
WARNING
Active implant malfunctions due to electromagnetic 󹪝elds
Con
verter
s generate electromagnetic 󹪝elds (EMF) in operation. Electromagnetic 󹪝elds may
interfere with active implants, e.g. pacemakers. People with active implants in the immediate
vicinity of an converter are at risk.
• As the operator of an EMF-emitting installation, assess the individual risks of persons with
active implants.
• Observe the data on EMF emission provided in the product documentation.
WARNING
Active implant malfunctions due to permanent-magnet 󹪝elds
Ev
en when switched o󹪜,
electric motors with permanent magnets represent a potential risk for
persons with heart pacemakers or implants if they are close to converters/motors.
• If you have a heart pacemaker or implant, maintain the minimum distance speci󹪝ed in the
Chapter "Technical data".
• When transporting or storing permanent-magnet motors always use the original packing
materials with the warning labels attached.
• Clearly mark the storage locations with the appropriate warning labels.
• IATA regulations must be observed when transported by air.
Fundamental safety instructions
2.1General safety instructions
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
24 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA