Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Commissioning the system
1.2 User administration
PCU-Basesoftware (IM8)
20 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Example: Specific user settings
The settings under "Global Settings" are inherited by all users:
1. Left-click the user in the "Users" list.
2. After entering the password, you can adapt the settings as required.
The settings that cannot be changed are displayed with a gray background.
Figure 1-8 Specific settings for the "HMI (user.group)" user

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English