Additional language
22
22.1 Installing additional languages
Additional languages
In addition to the already existing standard languages, additional user interface languages are
available on a separate DVD.
The integrated online help is either displayed in the relevant language of the country or in
English.
Refer to the following chapter for the languages that are available for the user interface:
Supported languages (Page 656)
Precondition
Software option
You require the following software option in order to use this function:
"Additional languages"
● After the installation, approx. 256 MB memory must be available on the CompactFlash Card.
● Language extension software "hmi_sl_language_xxx_02.06.00.00.00y.arc".
xxx = language code, y = internal version ID
Is supplied on the language extension DVD.
Installing a language
Install the language the same as for a commissioning archive (ARC). For the procedure, please
refer to the following chapter: Reading-in a start-up archive (Page 359)
Note
Language extensions software of the previous version is compatible with the current operating
software.
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 655
To Next Page
Loading...
Need help?
General
