Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

4.3 Changing the name of the PC system
A unique computer name must be set after installation of the PCU base software. You can
view and change it in the Control Panel of the Service Desktop.
You will find the computer name in the Control Panel under Category "System and Security",
Section "Computer name, domain, and workgroup settings",
Configuration of the system
4.3 Changing the name of the PC system
PCU Base Software (IM10)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 31

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English