Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Backing up and restoring data
4.3 Functions of the Service Center
PCU-Basesoftware (IM8)
88 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
4.3
Functions of the Service Center
Overview
In the upper section of the Service Center main menu, you can select one of five tasks.
Buttons for additional functions are available in the lower section.
Figure 4-1 Service Center - Main menu
Table 4- 1 Functions in the main menu of the Service Center
Element of the window
Purpose
Disk Backup Create a disk image of the local SSD.
With this command, you can create a disk image of the entire SSD (with all partitions).
Disk Restore Restore the local SSD with an existing disk image.
With this command, you can restore the complete SSD (with all partitions) with a previously created disk
image.
Partition Backup Create a disk image of a partition on the local SSD.
With this command, you can create a disk image of an individual partition of the SSD.

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English