Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Commissioning the system
1.5 BIOS settings for PCU 50.5
PCU-Basesoftware (IM8)
40 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Chipset Configuration
Default settings
Own entries
Port 80h Cycles
LPC Bus
VT-d
Enabled
HPET
Enabled
CPU Configuration
Default settings
Own entries
P-States (IST)
Enabled
Turbo Mode
Enabled
CMP Support
Auto
HT Support
Auto
Use XD Capability
Disabled
VT Support
Enabled
Turbo Mode
Disabled
C-States
Enabled
Active Management Technology
Support
Default settings
Own entries
Intel AMT Support
Disabled
Intel AMT Setup promt
Disabled
AMT CIRA Request Trig
Disabled
AMT DIRA Timerout
30
Un-Configure ME
Disabled
USB Configure Enabled
Advanced
Default settings
Own entries
Fan control
Enabled
Operating Mode Switch Enabled
Menu: Security
System parameters
Default settings
Own entries
Supervisor Password
Not installed
User Password
Not installed
Set Supervisor Password
Inactive (no password assigned)
Set User Password
Inactive (no password assigned)

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English