Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Configuring the system
2.1 System settings
PCU-Basesoftware (IM8)
46 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
4. Under the "General" tab, select the "Use the following IP address" option and enter the IP
address and the subnet screen form.
Recommended setting for the first PCU:
5. Enter the required new IP address and confirm the settings with "OK".

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English