4. Position the cursor on the desired file.
5. Press the "Copy" softkey.
6. For instance, on the NCU in the "System CF card" directory, under "oem"
or "user" open the required directory (e.g. /sinumerik/hmi/cfg), in which
the copied file should be saved.
7. Press the "Paste" softkey.
If a file of the same name already exists, you receive a message. You can
overwrite or rename the file.
8. Press the "OK" softkey.
9. You can open the selected file in the editor by pressing the "Open" softkey.
- OR -
Press the <INPUT> key.
- OR -
Double-click the highlighted file.
Rename file
1. Select the required file.
2. Press the ">>" and "Properties" softkeys.
The "Properties of..." window opens.
The following data is displayed:
● Path:
● Name:
● Creation date and time:
● Date of change and time:
3. To change the file name, place the cursor in the "Name" entry field and
overwrite the name. Date of change and time are simultaneously updated.
4. Press the "OK" softkey to save the new name.
Cut-out/delete file
1. Select the required file.
2. Press the "Cut" softkey.
The file is copied into the buffer and at the same time deleted from the
previous directory.
As the file is located in the buffer, you can also insert the file into another
directory.
Principles of start-up
2.2 Editing files
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 25
To Next Page
Loading...
Need help?
General
