Alternatively, you can use the "PridaNet identSNAPSHOT" program to export the machine and
address information from the Service Platform Industry database and use it as a template.
This ensures that the information is clear.
Templates
The directory HMI Data/Templates/Examples/Machine identity contains a selection of
templates.
You will find the following templates on the controller:
● "dealer.xml" for dealer data
● "ma_types.xml" for machine types
● "oem.xml" for manufacturer data
● "oemsubs.xml" for manufacturer data of a regional office
● "user.xml" for end user data
Procedure
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
3. Copy the files from the folder
/HMI-data/templates/examples/machine identity to a data carrier.
4. Copy the files to your PC for processing.
5. After processing, copy the data to a data storage medium and transfer
them to the controller.
6. Insert the copies into the folder HMI-data/Templates/Manufacturer/Ma‐
chine identity or use the "Import data" softkey.
The addresses or machine types are displayed in drop-down list boxes.
When you select a list, the data stored for that address is automatically
entered in the input fields.
Entering dealer data
You enter the address data of any number of dealers in the file "dealer.xml". If you want to
enter additional dealers, copy the <Dealer> to <Dealer> area for each dealer.
<?xml version="1.0" encoding="utf-8" ?>
<Addresses>
<Dealer>
Service and diagnostics
18.5 Machine identity
SINUMERIK Operate (IM9)
430 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
