Time display formats
Format Example Hour system
H:m:s AP 1:2:4 PM 24 hour system, with display of "AM" / "PM"
h:m:s ap 1:2:8 pm 12 hour system, with display of "am" / "pm"
HH:mm:ss AP 13:02:08 PM 24 hour system, with display of "AM" / "PM"
hh:mm:ss ap 01:02:09 pm 12 hour system, with display of "am" / "pm"
H:mm:ss AP 1:02:09 PM 24 hour system, with display of "AM" / "PM"
h:mm:ss ap 1:02:09 pm 12 hour system, with display of "am" / "pm"
h:mm:ss 13:02:09 24 hour system
hh:mm:ss 13:12:04 24 hour system
The following applies:
Time symbol: Description of the entry
h Single or double digit hour (0 - 23 or 1 - 12 for am/pm).
hh Double digit hour, with leading zero (00 - 23 or 01 - 12 for am/pm).
H Single or double digit hour (0 - 23 for AM/PM).
HH Double digit hour, with leading zero (00 - 23 for AM/PM).
m Single or double digit minute (0 - 59).
mm Double digit minute, with leading zero (00 - 59).
s Single or double digit second (0 - 59).
ss Double digit second, with leading zero (00 - 59).
AP Display of the time of day: AM or am = before midday or
PM or pm = after midday
Procedure
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey.
3. Press the "Date/Time" softkey.
The "Set Date and Time" window opens.
4. Select the required formats for the date and time with the <SELECT> key
in the "Format" field.
5. For SINUMERIK Operate in the NCU: In the entry fields after "new" enter
the actual date and time.
For SINUMERIK Operate on PCU/PC: In the entry fields after "new NCU
+ PCU" enter the actual date and time.
6. Confirm the entry with the "OK" softkey.
The new date and time details are accepted and output in the fields "actual
NCU" and "actual PCU".
General settings
3.2 Set date/time
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 31
To Next Page
Loading...
Need help?
General
