● Workpieces directory
● Workpiece directories
Note
Working via remote access
When working via remote access (e.g. WinSCP or Access MyMachine) the same access
rights apply for editing or saving files and directories as directly at the controller.
Access rights via machine data
The following machine data is still available to globally allocate access rights:
MD51050 $MNS_ACCESS_WRITE_PROGRAM
Default setting = 4 (access level: User)
Note
Effect of access rights
The more restrictive setting is always effective both when individual access rights have been
allocated and when settings have been made via
MD51050 $MNS_ACCESS_WRITE_PROGRAM.
Settings in the slfsfileattributes.ini file
The slfsfileattributes.ini file is available as a template in the following directory:
../siemens/sinumerik/hmi/template/cfg
The values from 0 ... 7 correspond to the access levels that, for example, also apply to the
password. The 4-digit numbers designate the sequence according to the following rights:
Significance from left to right: R W X S
R READ Reading files and directories
W WRITE Changing, deleting or creating files and directories
X EXECUTE Executes program: For files, for directories, always 7
S SHOW Outputs a list of files and directories
Copy the slfsfileattributes.ini file into one of the following directories:
../oem/sinumerik/hmi/cfg or ../user/sinumerik/hmi/cfg
The operating software must be restarted in order that the changes become effective.
Example
The paths are composed of the data type identifiers. In the following example, "\wks.dir\*.wpd
\*.mpf" comprises the data type for workpiece directories "wks.dir" the workpieces "*.wpd" and
the part programs "*.mpf".
For all workpieces, 7777 is defined as default setting for new part programs.
General settings
3.11 Access levels
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 41
To Next Page
Loading...
Need help?
General
