KEY5.0 = area:=AreaDiagnosis, dialog:=SlDgDialog,
cmdline:="-slGfwHmiScreen SlDgAeAlarmsScreen"
; CUSTOM (hardkey block)
KEY6.0 = area:=Custom
; MACHINE key (optional, Shift + F10)
KEY7.0 = area:=AreaMachine, dialog:=SlMachine,
cmdline:="-MKey"
; MENU USER (hardkey block, Ctrl + F10)
KEY10.0 = area:=MenuUser
; MENU FUNCTION (hardkey block, Ctrl + Shift + F10)
KEY11.0 = area:=MenuFunction
KEY50.0 = area:=CustomXML, dialog:=SlEECustomDialog
The area and dialog identifiers can be found in the systemconfiguration.ini from [System
Siemens directory]/cfg.
If only the SlEECustomDialog is used, the parser expects the xmldial.xml file in the application
directory as well as a menu tag with the name main. Other file names or main menu names
can be declared by adding the cmdline key. The -mainModule parameter specifies the XML
description to be loaded. The parser expects the main menu in this script. The -entry parameter
specifies the name of the main menu. If this parameter is missing, the parser uses the name
main to start the function. The -conf parameter with the value slagmdialog.hmi must always
be included.
Here is an example:
KEY50.0 = area:=CustomXML, dialog:=SlEECustomDialog,
cmdline:="-conf slagmdialog.hmi -mainModule restore.xml -entry cmc2"
KEY51.0 = area:=CustomXML, dialog:=SlEECustomDialog,
cmdline:="-conf slagmdialog.hmi -mainModule activate.xml
-entry cmc1"
User interface
The following entries in the systemconfiguration.ini file enable the use of Easy XML for the
function described above.
AREA0111= name:=CustomXML, dialog:=SlEECustomDialog,
panel:=SlHdStdHeaderPanel
DLG056= name:=SlEECustomDialog,
implementation:=slagmdialog.SlEECustomDialog, process:=SlHmiHost1,
preload:=false, terminate:=true, cmdline:="-conf slagmdialog.hmi"
Generating commissioning dialogs
2.3 Dialog selection via PLC hardkeys
Easy XML
182 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
