Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

8. The following message will appear:
9. Shorten the filename to match SINUMERIK Operate requirements and make
sure the extension (.der) is still appended. Then press softkey “Ok”
Verify certificate is in trusted folder:
10. Then the connection to the server can be established from the OPC UA client.
Setting up of OPC UA server
3.4 Certificate handling
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1 23

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English