Silca Triax Pro - Technical Data

1.2 TECHNICAL DATA
Power supply:
230V - 50Hz
100V - 50/60Hz
Maximum absorbed power:
230V: 1 Amp. 230 Watt
100V: 2.5 Amps. 250 Watt
Cutter motor:
Brushless Motor 48V - 200W
Cutters:
Usable
Tool speed:
6000-19000 rpm
Movements:
on 3 axes with ball screws activated by step motors on rectied roller guides.
Clamp:
R29+R28 removable
- R29: provided with 01J-02J jaws for copying dimple/laser keys
- R28: for engraving
Runs:
lower axis Y 57 mm
upper axis X: 32 mm
vertical axis Z: 30 mm
Dimensions:
width: 450 mm
depth: 600 mm
height: 510 mm (with shield raised 680 mm)
Mass:
Kg. 51.5
Noise rating:
sound pressure Lp (A) =dB(A) 77 (cutting steel keys)
brass dimple keys Leq. (A) = dB(A) 68.2
nickel silver dimple keys Leq. (A) = dB(A) 72.9
nickel silver laser type keys Leq. (A) = dB(A) 70.4
steel laser type keys Leq. (A) = dB(A) 72.3
Operating manual TRIAX PRO
Copyright Silca 2016
10