6 OPERATING GUIDE
The Operating Guide explains how to use the TRIAX PRO without the aid of a personal computer.
The operations are explained step by step so that the key-cutting machine can be used in manual mode.
The PC programs that can be connected to the key-cutting machine can transmit the data needed to perform
cutting or engraving operations.
PC programs eliminate manual execution of some functions and skip some of the Operating Guide video screens
once the data have been transmitted.
6.1 MACHINE KEYPAD AND FUNCTION BUTTONS
Fig. 30
The MENU button shows a list of the main functions:
MENU: is always active from any window
Function keys: select the on-screen options
ARROW keys (right/left/up/down: used to move the pointer (navigation) in the on-screen elds
CLEAR: used to delete a single character
SHIFT+ CLEAR: pressed together to delete an entire row
SHIFT+ENTER: pressed together to insert a digit space
START: starts the procedure
STOP: cancels the operation and/or goes back to previous menu.
Operating manual TRIAX PRO
Copyright Silca 2016
27
To Next Page
Loading...
