Silca Triax Pro - Functions for an Engraving Template

6.8.2 FUNCTIONS FOR AN ENGRAVING TEMPLATE
There are two types of templates:
• Templates predened by SILCA
• User templates
Function With PC program With TRIAX alone
Use of predened templates, i.e. over 200 templates relating to
SILCA key blanks ready for use.
The following can be edited but not saved in the machine memory:
- contents of the lines of text
- material thickness
- engraving depth
X X
Creation of User templates X
Use of User templates X X
Transferred by SKP to
a special archive on the
machine
Editing user templates X X
Limited to:
- contents of lines of text
- material thickness
- engraving depth
- position of lines
Operating manual TRIAX PRO
Copyright Silca 2016
46