2 TRANSPORT
The key-cutting machine is easily transported and its handling does not involve any special hazards. It can be
packed and transported manually by 2 (or more) persons.
2.1 PACKING
The packing for the TRIAX PRO machine ensures that during transport the machine and all its components are
safe and protected.
The packing comprises a pallet base on which the machine stands and is secured, and a cardboard cover.
The machine is secured to the base with screw brackets that stop the load from sliding during transport, which
could damage the safety shield in particular.
When the packing is closed it is held by two straps that tie the cardboard box rmly to the pallet.
The symbols on the outside of the cardboard box give transport instructions.
ATTENTION: keep the packing to use when re-locating the machine.
Keep dry Handle with care Up Do not use hooks
ATTENTION: when transporting the machine, use the original packing and secure the machine with the
special brackets.
Operating manual TRIAX PRO
Copyright Silca 2016
12
To Next Page
Loading...
